3D printers · Creality
The Ender 3 is a printer people keep running, rebuild for fun, and buy again secondhand because it rewards tinkering and costs little enough that mistakes are part of the deal.
Owners describe machines that keep printing after years of use, board replacements, and storage. Several have accumulated multiple units specifically because working ones turn up cheaply and come back to life with minimal intervention.
Owners are divided on how much hands-on work the printer demands. Some find the tinkering to be the point, spending more time building and modding than actually printing functional parts. Others find the constant adjustment frustrating, particularly around firmware and getting consistent results without machinist-level intervention on the frame.
The Creality Ender-3 S1 is an open-frame 3D printer that builds plastic objects layer by layer from a reel of filament. It suits hobbyists and beginners who want a printer that is mostly assembled out of the box and levels its own bed. It prints common filaments such as PLA, PETG, ABS and TPU.
| Build volume | 220 x 220 x 270 mm |
|---|---|
| Printer type | FDM (filament), direct-drive extruder |
| Max speed | |
| Nozzle temperature | Up to 260°C |
| Bed temperature | Up to 100°C |
| Enclosure | |
| Auto bed levelling | Yes, CR-Touch |
| Warranty |
From the maker's spec page, checked October 8, 2026. A blank row means the maker does not state it.
220 x 220 x 270 mm means each part can be about the size of a large shoebox standing on its end. 260°C at the nozzle and 100°C at the bed are enough for everyday filaments like PLA, PETG and TPU. Very hot materials like nylon or polycarbonate are a stretch. CR-Touch levelling means the printer measures its own bed, so you won't spend much time adjusting it with paper and knobs.
Pick up to three. You get a page with just those, side by side, on the subjects owners raised.
After the novelty passes, the Ender 3 tends to settle into a specific role rather than a general one. Owners use it for low-stakes prints, filament testing, and parts that do not need to be perfect. The comparison that comes up is a Miata: not the fastest or most capable thing, but enjoyable to run and cheap enough that pushing it is fine. Several owners describe keeping one running alongside newer machines precisely because it costs nothing to experiment on.
What owners adjust to is the baseline assumption that the printer will need attention. Bed leveling, extrusion calibration, and firmware decisions are not one-time tasks. Owners who run Klipper describe a smoother experience than those staying on stock Marlin. The ones who get the most out of it tend to describe their hobby as the printer itself, not whatever the printer is making.
The reliability theme is the most consistent positive signal in the data. Machines that were stored, repaired, or bought secondhand in unknown condition come back to working order. Creality replaced at least one bricked motherboard from a manufacturing issue during a known production problem, which owners note as a reasonable response to a real defect.
Long-term accounts beyond two or three years are thin in this sample. What is here suggests the hardware outlasts normal expectations for the price, but there are not enough multi-year follow-ups to say how the machines hold up past that point with confidence.
From 1 owner account that said how long they have had it. Own one? Add how long yours has lasted.
Nothing has a clear majority against it yet. Counted from the owners who raised each subject, not from everyone. A subject is judged once at least 4 owners raise it.
16 more subjects came up from fewer than 4 owners each, which is not enough for a fair reading. To see how it stacks up, compare it with another machine.
The same owner, asked again at each point. Fills in as owners answer.
Two questions: how long you have had it, and anything you would like to say about it. Then we ask again as it ages. This helps our mission.
More in 3d printers: Creality Hi, Bambu Lab X1C, Prusa Mk3.
Among the 1 owner accounts here that gave a duration, 0 described a failure.
Before you buy one used, ask the seller: how old it is, whether it was ever repaired and by whom, and whether any of the parts above have been replaced. Ask to see it run. A receipt tells you the warranty start date; most makers honour the term only for the first owner.
Public discussions we read and summarised in our own words. Nothing here was submitted to Still Kicks.
Counted from public accounts by people who said they own it, and summarised by Still Kicks in its own words. Not a manufacturer claim, a lab test or an estimate.
No account needed to look. Sign in with Google only if you want to track something you own.